{"product_id":"30-meter-waterproof-case","title":"30m Waterproof Dive Case for Insta360 ONE X2 - Underwater Housing with 1\/4\" Screw Mount","description":"\u003ch2\u003eTake Your Insta360 ONE X2 Underwater — Down to 30 Meters (100 Feet)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003ePOWRIG Waterproof Dive Case for Insta360 ONE X2 (Model WP-ONEX2)\u003c\/strong\u003e is a purpose-built underwater housing that lets you capture stunning 360° footage at depths of up to 30 meters (100 feet). Whether you're scuba diving a coral reef, snorkeling with sea turtles, or filming barrel waves while surfing, this case keeps your Insta360 ONE X2 safe, dry, and shooting in full panoramic quality.\u003c\/p\u003e\n\u003cp\u003eThe transparent housing is precision-molded to fit the Insta360 ONE X2 snugly, with clear optical-grade covers over both lenses to maintain image clarity and seamless 360° stitching. A built-in \u003cstrong\u003e1\/4\"-20 threaded screw mount\u003c\/strong\u003e on the bottom lets you attach the case directly to any standard tripod, underwater tray, selfie stick, or extension pole — no additional adapter needed.\u003c\/p\u003e\n\u003ch2\u003eWho Is This Dive Case For?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScuba Divers\u003c\/strong\u003e — Capture immersive 360° footage of reefs, wrecks, and marine life at recreational diving depths (up to 30m\/100ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnorkelers \u0026amp; Freedivers\u003c\/strong\u003e — Lightweight and easy to handle at the surface or during breath-hold dives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurfers \u0026amp; Water Sports Enthusiasts\u003c\/strong\u003e — Protect your camera from impact, salt water, and sand while filming waves, kayaking, or paddleboarding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderwater Photographers \u0026amp; Videographers\u003c\/strong\u003e — Professional-grade housing for commercial underwater shoots, pool photography, and real estate pool tours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdventure Travelers\u003c\/strong\u003e — Waterproof protection for any wet environment: waterfalls, rivers, rain, mud, and dust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30m \/ 100ft Waterproof Depth\u003c\/strong\u003e — Rated for recreational scuba diving depths. O-ring sealed for reliable waterproofing under pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 360° Lens Coverage\u003c\/strong\u003e — Optical-grade transparent covers over both front and rear lenses preserve image quality and allow seamless 360° stitching in post-production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Fit for Insta360 ONE X2\u003c\/strong\u003e — Precision-molded housing that fits the ONE X2 body exactly, with access to all buttons and ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\"-20 Screw Mount\u003c\/strong\u003e — Standard thread on the base for direct attachment to tripods, underwater trays, selfie sticks, and extension poles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e — Built to withstand saltwater, sand, dust, and impact. Easy to rinse and maintain after each dive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact \u0026amp; Travel-Friendly\u003c\/strong\u003e — Minimal added bulk — slides easily into your dive bag or carry-on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%;\" cellspacing=\"0\" cellpadding=\"8\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWP-ONEX2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Camera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInsta360 ONE X2 (not compatible with ONE X, X3, X4, or other models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #fafafa;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eWaterproof Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 meters \/ 100 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/4\"-20 threaded screw (standard tripod thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #fafafa;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eLens Cover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOptical-grade transparent dome (both lenses)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeal Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eO-ring seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #fafafa;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eUse Cases\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eScuba diving, snorkeling, surfing, freediving, kayaking, pool photography, water sports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Use the Dive Case\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Dive Check:\u003c\/strong\u003e Before each use, inspect the O-ring for debris, hair, or damage. Apply a thin layer of silicone grease if needed. Ensure the O-ring is seated correctly in its groove.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Camera:\u003c\/strong\u003e Open the housing, place your Insta360 ONE X2 inside, and align the lenses with the transparent dome covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal the Case:\u003c\/strong\u003e Close the housing and secure the latch\/clasp firmly. Verify that all edges are fully sealed with no gaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Test (Recommended):\u003c\/strong\u003e Before your first deep dive, submerge the empty case (or case with camera) in a pool or bucket for 10-15 minutes to check for leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount and Shoot:\u003c\/strong\u003e Attach the case to your selfie stick, tray, or tripod using the 1\/4\"-20 screw mount. Start recording and dive in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-Dive Care:\u003c\/strong\u003e Rinse the case thoroughly with fresh water after each saltwater use. Open, dry the O-ring and housing interior, and store in a cool, dry place.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eInsta360 ONE X2 vs. Other Models — Compatibility Note\u003c\/h2\u003e\n\u003cp\u003eThis dive case is designed \u003cstrong\u003eexclusively for the Insta360 ONE X2\u003c\/strong\u003e. It will not fit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsta360 ONE X (original) — different body shape\u003c\/li\u003e\n\u003cli\u003eInsta360 X3 — larger body, requires X3-specific housing\u003c\/li\u003e\n\u003cli\u003eInsta360 X4 — larger body, requires X4-specific housing\u003c\/li\u003e\n\u003cli\u003eInsta360 GO series — completely different form factor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you own a different Insta360 model, check our store for the matching waterproof case or contact us at \u003cstrong\u003einfo@powrig.com\u003c\/strong\u003e for recommendations.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x POWRIG 30m Waterproof Dive Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: Insta360 ONE X2 camera is not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty \u0026amp; Support\u003c\/h2\u003e\n\u003cp\u003eAll POWRIG products come with a \u003cstrong\u003e1-year limited warranty\u003c\/strong\u003e covering manufacturing defects. Have questions about compatibility or dive case maintenance? Email us at \u003cstrong\u003einfo@powrig.com\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs this dive case compatible with the Insta360 X3 or X4?\u003c\/h3\u003e\n\u003cp\u003eNo. This case is designed exclusively for the Insta360 ONE X2. The X3 and X4 have larger bodies and require their own specific dive housings.\u003c\/p\u003e\n\u003ch3\u003eWill the 360° stitching still work with the case on?\u003c\/h3\u003e\n\u003cp\u003eYes. The optical-grade transparent dome covers are designed to maintain clear visibility for both lenses, allowing Insta360's stitching algorithm to work properly in post-production. Some minor refraction may occur at extreme angles — this is normal for all underwater housings.\u003c\/p\u003e\n\u003ch3\u003eCan I use the touchscreen through the case?\u003c\/h3\u003e\n\u003cp\u003eNo. The waterproof housing does not support touchscreen operation underwater. You should start recording and set your desired mode before sealing the case. The Insta360 ONE X2's single-button operation makes this easy — press once to start\/stop recording.\u003c\/p\u003e\n\u003ch3\u003eHow do I prevent fogging inside the case?\u003c\/h3\u003e\n\u003cp\u003ePlace a small anti-fog insert or silica gel packet inside the housing before sealing. Avoid opening and closing the case in humid environments. If fogging occurs, open the case, dry both the camera and housing, and re-seal.\u003c\/p\u003e\n\u003ch3\u003eHow deep can I safely take this case?\u003c\/h3\u003e\n\u003cp\u003eThe case is rated to 30 meters (100 feet), which covers recreational scuba diving depths. Do not exceed this rating. For technical diving beyond 30m, professional-grade housings rated to 60m+ are recommended.\u003c\/p\u003e\n\u003ch3\u003eDoes the case float or sink?\u003c\/h3\u003e\n\u003cp\u003eThe case with the camera inside will sink. If you need flotation, attach a floating hand grip or buoyancy arm to the 1\/4\"-20 screw mount.\u003c\/p\u003e\n\u003ch3\u003eHow do I maintain the O-ring seal?\u003c\/h3\u003e\n\u003cp\u003eAfter each use, rinse the case with fresh water. Periodically remove the O-ring, clean it with fresh water, inspect for nicks or debris, and apply a thin layer of silicone grease before reinstalling. Replace the O-ring if you notice any damage or if the case fails a water test.\u003c\/p\u003e","brand":"POWRIG","offers":[{"title":"Default Title","offer_id":45926652051739,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2270\/2571\/files\/divingcaseforinstaX2camera-2.jpg?v=1753175566","url":"https:\/\/www.powrig.com\/products\/30-meter-waterproof-case","provider":"POWRIG","version":"1.0","type":"link"}