{"product_id":"dji-ronin-rs2-to-venice-2-power-cable","title":"DJI RS2 to Sony Venice 2 Power Cable – 6-Pin LEMO to 4-Pin XLR","description":"\u003carticle itemtype=\"https:\/\/schema.org\/Product\" itemscope=\"\"\u003e\u003cmeta itemprop=\"name\" content=\"POWRIG DJI Ronin 2 to Sony VENICE 2 Power Cable 6-Pin LEMO to 4-Pin XLR\"\u003e \u003cmeta itemprop=\"sku\" content=\"RS2-V2\"\u003e \u003cmeta itemprop=\"brand\" content=\"POWRIG\"\u003e \u003c!-- Section 1: Overview --\u003e\n\u003csection aria-labelledby=\"overview-heading\"\u003e\n\u003ch2 id=\"overview-heading\"\u003ePOWRIG DJI Ronin 2 to Sony VENICE 2 Power Cable (RS2-V2)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003ePOWRIG RS2-V2\u003c\/strong\u003e is a dedicated power cable that connects the \u003cstrong\u003eDJI Ronin 2\u003c\/strong\u003e professional cinema gimbal's \u003cstrong\u003e14.4V accessory power output\u003c\/strong\u003e (6-pin LEMO) to the \u003cstrong\u003eSony VENICE 2\u003c\/strong\u003e (CineAlta V2), original \u003cstrong\u003eSony VENICE\u003c\/strong\u003e, and \u003cstrong\u003eSony F55\u003c\/strong\u003e cinema cameras via a \u003cstrong\u003eright-angle 4-pin XLR\u003c\/strong\u003e DC power input.\u003c\/p\u003e\n\u003cp\u003eThis cable enables the Ronin 2's TB50 battery system to power the Sony VENICE 2 camera body directly, eliminating the need for a separate on-camera battery plate and reducing total rig weight on gimbal, Steadicam, car mount, and remote head setups.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003e50 cm (19.7\")\u003c\/strong\u003e and \u003cstrong\u003e100 g\u003c\/strong\u003e, the cable provides sufficient reach for standard gimbal-to-camera mounting configurations while remaining lightweight and manageable. \u003cem\u003eCustom cable lengths are available — contact us at info@powrig.com for requests.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- Section 2: Key Features --\u003e\n\u003csection aria-labelledby=\"features-heading\"\u003e\n\u003ch2 id=\"features-heading\"\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDJI Ronin 2 Power Source (6-Pin LEMO Male)\u003c\/strong\u003e — Connects to the Ronin 2 gimbal's accessory power output port, which draws from the Ronin 2's dual TB50 battery system (14.4V nominal). The 6-pin LEMO male connector uses a 4+2 pin configuration matching the DJI Ronin 2 power output interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSony VENICE 2 Camera Connector (Right-Angle 4-Pin XLR Female)\u003c\/strong\u003e — The 4-pin XLR female connector matches the Sony VENICE 2, VENICE, and F55 camera DC power input standard. The right-angle design routes the cable flush against the camera body, preventing protrusion inside camera cages and reducing strain on the XLR port during movement and vehicle mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14.4V Compatible with Sony VENICE 2 DC Input\u003c\/strong\u003e — The Sony VENICE 2 accepts DC input via the 4-pin XLR port. The Ronin 2's 14.4V TB50 battery output falls within the camera's operating voltage range. \u003cem\u003eAlways verify your specific VENICE 2 firmware and power settings in the Sony manual before connecting external power.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 cm (19.7\") Versatile Length\u003c\/strong\u003e — Provides sufficient cable run for most gimbal-to-camera mounting configurations, including cage-mounted setups, top-plate mounting, and side-mounted configurations. Longer than the 30 cm cables used for tight cage routing, but short enough to avoid excess cable management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 g Lightweight\u003c\/strong\u003e — Adds minimal weight to the gimbal-to-camera power run. Important for Steadicam and gimbal operators where cable weight affects balance calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Gauge Shielded Conductors\u003c\/strong\u003e — Sized to handle the Sony VENICE 2's power draw (approximately 50–70W depending on sensor mode, Rialto extension, accessories, and recording format) without voltage drop or cable heating. Shielding prevents EMI interference from nearby wireless video transmitters and radio microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Lengths Available\u003c\/strong\u003e — Contact POWRIG at info@powrig.com to order this cable in custom lengths for specific rig configurations (crane, remote head, vehicle mount with extended cable runs).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- Section 3: Specifications Table --\u003e\n\u003csection aria-labelledby=\"specs-heading\"\u003e\n\u003ch2 id=\"specs-heading\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccaption class=\"sr-only\"\u003ePOWRIG RS2-V2 Power Cable Specifications\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eRS2-V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGimbal Connector\u003c\/th\u003e\n\u003ctd\u003e6-pin LEMO male (4+2 pin, DJI Ronin 2 accessory power output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCamera Connector\u003c\/th\u003e\n\u003ctd\u003e4-pin XLR female, right-angle (Sony VENICE \/ F55 DC input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e14.4V nominal (from Ronin 2 TB50 battery system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCable Length\u003c\/th\u003e\n\u003ctd\u003e50 cm \/ 19.7 inches (custom lengths available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e100 g (3.5 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCable Type\u003c\/th\u003e\n\u003ctd\u003eShielded, heavy-gauge conductors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible Gimbal\u003c\/th\u003e\n\u003ctd\u003eDJI Ronin 2 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible Cameras\u003c\/th\u003e\n\u003ctd\u003eSony VENICE 2, Sony VENICE, Sony F55 \/ F5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- Section 4: What's in the Box --\u003e\n\u003csection aria-labelledby=\"box-heading\"\u003e\n\u003ch2 id=\"box-heading\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × POWRIG RS2-V2 power cable (50 cm \/ 19.7\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: DJI Ronin 2 gimbal, Sony VENICE 2 camera, and TB50 batteries are not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- Section 5: Compatible Equipment --\u003e\n\u003csection aria-labelledby=\"compat-heading\"\u003e\n\u003ch2 id=\"compat-heading\"\u003eCompatible Equipment\u003c\/h2\u003e\n\u003ch3\u003eSony Cinema Cameras\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccaption class=\"sr-only\"\u003eSony cinema camera compatibility for POWRIG RS2-V2 cable\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSony Camera\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eAlso Known As\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e4-Pin XLR DC Input\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eCompatible\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony VENICE 2\u003c\/th\u003e\n\u003ctd\u003eCineAlta V2\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony VENICE\u003c\/th\u003e\n\u003ctd\u003eCineAlta V\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony F55\u003c\/th\u003e\n\u003ctd\u003ePMW-F55\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony F5\u003c\/th\u003e\n\u003ctd\u003ePMW-F5\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony VENICE 2 (Rialto Extension)\u003c\/th\u003e\n\u003ctd\u003eVENICE 2 with sensor block separated\u003c\/td\u003e\n\u003ctd\u003eYes (via Rialto cable)\u003c\/td\u003e\n\u003ctd\u003eCheck — cable may need to reach extension system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony FX9 \/ FX6 \/ FX3\u003c\/th\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eNo (use DC barrel or other connector)\u003c\/td\u003e\n\u003ctd\u003eNo — different power input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDJI Gimbals\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ccaption class=\"sr-only\"\u003eDJI gimbal compatibility for POWRIG RS2-V2 cable\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eDJI Gimbal\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eCompatible\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDJI Ronin 2\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003e6-pin accessory power output, 14.4V from TB50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDJI RS2 \/ RS3 \/ RS3 Pro \/ RS4\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eDifferent connector and power output configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDJI Ronin-S \/ Ronin-SC\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo 6-pin accessory power output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- Section 6: Use Cases (AI search friendly) --\u003e\n\u003csection aria-labelledby=\"usecase-heading\"\u003e\n\u003ch2 id=\"usecase-heading\"\u003eProduction Scenarios for Ronin 2 Powered Sony VENICE 2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGimbal-mounted VENICE 2 (Steadicam replacement)\u003c\/strong\u003e — Mount the Sony VENICE 2 on the Ronin 2 and power it from the gimbal's TB50 batteries via this cable. The VENICE 2 body (~2.2 kg) is within the Ronin 2's 7 kg payload capacity, making this a viable Steadicam alternative for narrative and commercial productions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar mount \/ Russian Arm \/ pursuit vehicle\u003c\/strong\u003e — The Ronin 2 is mounted on a vehicle exterior with the VENICE 2 on the gimbal. The gimbal's TB50 batteries power both the gimbal motors and the camera, simplifying the power architecture to a single battery system and reducing cable clutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote head \/ technocrane\u003c\/strong\u003e — The Ronin 2 and VENICE 2 are mounted on a remote head at height. Powering the camera from the gimbal reduces the number of cables running down the crane and eliminates a separate camera battery that adds weight to the remote head motors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVENICE 2 with Rialto Extension\u003c\/strong\u003e — When using the Rialto camera extension system (sensor block separated from processing\/recording body), this cable can power the main camera body from a Ronin 2 mounted nearby. The 50 cm length may need to be extended for certain Rialto configurations — contact us for custom lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-camera studio \/ live production\u003c\/strong\u003e — In live production setups where multiple VENICE 2 cameras are mounted on Ronin 2 gimbals (e.g., concert coverage, sports), this cable standardizes the power architecture across all camera positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!-- Section 7: Power Draw Reference (AI search friendly) --\u003e\n\u003csection aria-labelledby=\"power-heading\"\u003e\n\u003ch2 id=\"power-heading\"\u003eSony VENICE 2 Power Draw Reference\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ccaption class=\"sr-only\"\u003eSony VENICE 2 power consumption and estimated TB50 battery runtime\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCamera\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTypical Power Draw\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eEst. Runtime (dual TB50, 189 Wh total)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony VENICE 2 (body only)\u003c\/th\u003e\n\u003ctd\u003e~50–60W\u003c\/td\u003e\n\u003ctd\u003e~2.5–3 hours (camera only, gimbal off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony VENICE 2 + Rialto Extension\u003c\/th\u003e\n\u003ctd\u003e~55–70W\u003c\/td\u003e\n\u003ctd\u003e~2–2.5 hours (camera only, gimbal off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony VENICE (original)\u003c\/th\u003e\n\u003ctd\u003e~45–55W\u003c\/td\u003e\n\u003ctd\u003e~3–3.5 hours (camera only, gimbal off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSony F55\u003c\/th\u003e\n\u003ctd\u003e~35–45W\u003c\/td\u003e\n\u003ctd\u003e~3.5–4.5 hours (camera only, gimbal off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e When the Ronin 2 gimbal motors are also powered from the same TB50 batteries, total combined runtime (gimbal + camera) is approximately \u003cstrong\u003e1–1.5 hours\u003c\/strong\u003e depending on payload, movement intensity, and accessories. Always carry spare TB50 batteries and use the Ronin 2's hot-swap capability (dual-bay configuration) for uninterrupted operation.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- Section 8: FAQ --\u003e\n\u003csection aria-labelledby=\"faq-heading\"\u003e\n\u003ch2 id=\"faq-heading\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eIs 14.4V from the Ronin 2 safe for the Sony VENICE 2?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe Sony VENICE 2 accepts DC input via its 4-pin XLR power connector. The camera's internal power management regulates the input voltage. \u003cstrong\u003eAlways verify the acceptable input voltage range in the Sony VENICE 2 Operations Manual\u003c\/strong\u003e before connecting any external power source. The Ronin 2's 14.4V TB50 output is commonly used to power cinema cameras in gimbal setups, but confirming compatibility with your specific camera firmware version is essential.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this cable work with the DJI RS2 or RS3?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e This cable is designed for the \u003cstrong\u003eDJI Ronin 2\u003c\/strong\u003e professional cinema gimbal, which has a 6-pin LEMO accessory power output port. The DJI RS2, RS3, RS3 Pro, and RS4 use different connectors and do not have the same 6-pin power output interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this cable work with the Sony FX9, FX6, or FX3?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e The Sony FX9, FX6, and FX3 use different power input connectors (DC barrel, BP-U battery slot, USB-C PD) — not a 4-pin XLR. This cable is compatible only with Sony cinema cameras that have a 4-pin XLR DC power input: the VENICE 2, VENICE, F55, and F5.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between 4-pin XLR and the XLR audio connectors I see on mixers?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 4-pin XLR used for DC power on cinema cameras is a different connector from the 3-pin and 5-pin XLR connectors used for audio. The 4-pin XLR (also called \"XLR4\" or \"power XLR\") carries only DC power — it does not carry audio signals. Pin 1 and 2 are typically ground, and Pin 3 and 4 are DC voltage positive. Do not confuse this connector with audio XLR ports.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I order this cable in a custom length?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. POWRIG offers custom cable lengths for specific rig configurations. Common custom requests include 30 cm (for tight cage setups), 100 cm (for crane and remote head cable runs), and 200 cm (for vehicle-mounted gimbal to in-car operator setups). Contact us at \u003cstrong\u003einfo@powrig.com\u003c\/strong\u003e with your desired length and we will provide a quote.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I power both the gimbal and the VENICE 2 from the same TB50 batteries?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. The Ronin 2's accessory power output draws from the same TB50 battery system that powers the gimbal motors. However, total runtime is reduced because both the gimbal and camera draw from the same battery capacity. For long shoots, carry spare TB50 batteries and use the Ronin 2's hot-swap capability (dual-bay configuration) to change batteries without powering down the camera.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the cable work with the Sony VENICE 2 Rialto Extension system?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe cable connects to the main VENICE 2 body's 4-pin XLR input, which powers the camera regardless of whether the Rialto extension is attached. However, the Rialto system may change the physical distance between the gimbal mounting point and the camera's power port. If 50 cm is not sufficient for your Rialto configuration, contact us for a custom-length cable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e\n\u003c\/article\u003e\n\u003c!-- FAQ Schema for Google Rich Results --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- Product Schema --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- Screen reader utility --\u003e\n\u003cstyle\u003e\n  .sr-only {\n    position: absolute;\n    width: 1px;\n    height: 1px;\n    padding: 0;\n    margin: -1px;\n    overflow: hidden;\n    clip: rect(0, 0, 0, 0);\n    white-space: nowrap;\n    border: 0;\n  }\n\u003c\/style\u003e","brand":"POWRIG","offers":[{"title":"Default Title","offer_id":45448144748827,"sku":"","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2270\/2571\/files\/rs2toSONYCineAltaV2powercable-1.jpg?v=1753175779","url":"https:\/\/www.powrig.com\/products\/dji-ronin-rs2-to-venice-2-power-cable","provider":"POWRIG","version":"1.0","type":"link"}