• Insta360 X3 transparent waterproof dive case, underwater protective housing with mount bracket
  • Insta360 X3 waterproof diving case empty & camera installed display, action camera underwater shell
  • Back view Insta360 X3 dive waterproof case, clear protective camera housing with lock buttons
  • Side closeup Insta360 X3 waterproof dive case, rugged underwater camera protective shell
1 4

40m Waterproof Dive Case for Insta360 X3 - Underwater Housing with 1/4" Mount

HIGH-TRANSMISSION CORROSION-RESISTANT HOUSING FOR 40M WATERPROOF DIVE CASE FOR INSTA360 X3 - UNDERWATER HOUSING WITH 1/4" MOUNT

$38.00 USD
$38.00 USD
Sale Sold out
Shipping calculated at checkout.

Product Overview

The POWRIG Waterproof Dive Case for Insta360 X3 (Model WP-ONEX3) is a purpose-built underwater housing that protects your Insta360 X3 camera at depths of up to 40 meters (131 feet) — 10 meters deeper than standard 30m housings. Whether you're exploring a coral reef, filming a surf session from below, or capturing immersive 360° footage of a wreck dive, this case keeps your X3 safe, dry, and shooting in full panoramic quality.

Key Advantages

  • 40m / 131ft Waterproof Depth — Rated 10 meters deeper than standard 30m cases, providing an extra safety margin for deeper recreational dives.
  • Full 360° Lens Coverage — Optical-grade transparent dome covers over both lenses preserve image quality and allow seamless 360° stitching in Insta360 Studio or the Insta360 app.
  • Custom Fit for Insta360 X3 — Precision-molded housing that fits the X3 body exactly, with access to all buttons.
  • 1/4"-20 Screw Mount — Standard thread on the base for direct attachment to tripods, underwater trays, invisible selfie sticks, and extension poles. No adapter needed.
  • Durable O-Ring Seal — Reliable waterproofing under pressure. Easy to inspect and maintain.
  • Compact & Travel-Friendly — Minimal added bulk. Slides easily into your dive bag or carry-on luggage.

Feature: Insta360 ONE X (1st generation) — different body shape

Feature: Insta360 ONE X2 — smaller body, use the WP-ONEX2 case instead

Feature: Insta360 X4 — larger body, requires X4-specific housing

Feature: Insta360 GO / GO 2 / GO 3 — completely different form factor

3× x POWRIG 40m Waterproof Dive Case for Insta360

3× No. This case (WP-ONEX3) is designed exclusively for the Insta360 . The has a larger body and the ONE has a smaller body — each requires its own specific housing

1× This case is rated to 40 meters (131 feet), which is 10 meters deeper than standard 30m housings. This extra depth rating provides a safety margin when diving near the 30m recreational limit, and covers Advanced Open Water dive depths up to 40m

1× Yes. The optical-grade transparent dome covers maintain clear visibility for both lenses, allowing Insta360's stitching algorithm to produce seamless 360° panoramas in the Insta360 app or Insta360 Studio. Minor refraction at extreme angles is normal for all underwater housings

3× No. The touchscreen is not accessible through the waterproof housing. Start recording and set your desired mode before sealing the case. The 's buttons allow basic operation (start/stop recording) through the housing

1× Place a small anti-fog insert or silica gel packet inside the housing before sealing. Avoid opening and closing the case in humid environments. If fogging occurs, dry both the camera and housing interior before re-sealing

3× The case with the inside will sink. For flotation, attach a floating hand grip or buoyancy arm to the 1/4"-20 screw mount on the base

1× After each use, rinse with fresh water. Periodically remove the O-ring, clean it, inspect for nicks or debris, and apply a thin layer of silicone grease before reinstalling. Replace the O-ring if damaged or if the case fails a water test

1× Absolutely. This case is ideal for any wet or dusty environment: snorkeling, surfing, kayaking, white-water rafting, pool photography, dusty off-road adventures, and more

Q: What setups and devices are compatible with the 40m Waterproof Dive Case for Insta360 X3 - Underwater Housing with 1/4" Mount?

A: It is purpose-built for compatible gear specified in the technical specifications. Please verify device connection ports, mounting standards, or voltage requirements prior to setup.

Q: How does this accessory streamline on-set rigging?

A: Designed specifically for field and studio workflows, it minimizes setup time, eliminates clutter, and ensures rock-solid dependability.